Redwood Ledged Braced Door 1981 x 838 x 40mm
2.5
2 Reviews
Hover Over to Zoom In
Overview
- Doors are unfinished and require fully finishing on site to protect and prevent the ingress of moisture, which can cause warping.
- Ledged and braced construction using quality tongue and grooved redwood board
- Can be trimmed up to a maximum of 24mm on any edge - any reduction should be removed evenly from each edge
- Supplied with ready to paint, stain or varnish
- Not suitable for treatment with any type of oil, polish or wax
- Supplied ready to paint, stain or varnish. Not suitable for treatment with any type of oil, polish or wax
- A natural timber product, a variation in texture, colour and grain can be apparent
- Does not include door furniture
- Door furniture sold separately
- Recommended Cavity Closers for this door are for a 100mm cavity SKU 176388 and for a 125mm cavity SKU 183248
Technical specification
Height
1981 mm
Thickness
40 mm
Width
838 mm
Door Height Imperial
6 ft 6 in
Door Thickness Imperial
1 3/4 in
Door Width Imperial
2 ft 9 in
Dimensions
1981 mm x 838 mm x 40 mm
Weight
17 kg
Material
Pine
Colour
Wood
Style
Ledged & Braced
Finish
Untreated
Opening Direction
Reversible
Trimmable
Up to 24 mm
Glazing Type
Unglazed
Lock Block
No
Range
Winslow
Certifications Met
FSC®Â®
Type
Exterior Door
Brand Name
Travis Perkins
Made To Order
N
Reviews
2.5
2 Reviews
Sort reviews:
Sort reviews by:
Reviewed by 2 customers
2
No
Not good. Considering the doors should be 762mm wide. The top was 765 and the bottom 760! Not good when setting out linings to measurements given. Doors are also twisted so two doors dont come together well.
5 years ago
Shaun from Cornwall
Type of purchase: Trade
No, I would not recommend to a friend
6
10
3
A basic access door for external use.
The door seems soundly made but will need proper preservative treatment to prevent weather damage. The gate is only 40 mm thick as advertised where the bracing is present. Elsewhere its about 15 mm thk.. I see no reason to limit trimming to the specified max. of 12 mm per edge and intend to remove significantly more in order to fit the opening. The weight is not given so one cannot know in advance if 3 hinges are needed. Actual wt probably 10 -15 kg. Summarising the specification is inaccurate and poorly written. (also what is a pine veneer finish? actually looks like clear varnish)
6 years ago
none from London SW
Type of purchase: DIY
Yes, I would recommend to a friend
48
18