It works for what I need it to. Staff were helpful and prompt.
Most liked negative review
Poor quality
Several arrived split, several arrived with significant cracks and later split, many collapsed edges and a wide variation in height - 223 mm is far too big for a 215 block!
Next time will wait for stock at our preferred supplier!
Sort reviews:
Sort reviews by:
Reviewed by 40 customers
5
Quality product, great service
Quality product, would buy again. But more importantly EXCELLENT service and facility in Elland Road.
2 months ago
Iynx from Leeds
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Planter ideas
Great blocks used for weighing down some garden planters and because of the holes there perfect for drainage
6 months ago
Debbie from Solihull
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
A quality product
A very heavy and solid block, hi quality.
9 months ago
Paul
0
0
5
I use TP for all my building needs
Great product and service
Thanks
9 months ago
Wayne
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Good product
Used for first course of a koi pond, forgot just how heavy they are !!
9 months ago
Antony
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
yes great strong block
good block lighter to handle
10 months ago
tyrone
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Spot On Service
Excellent product and customer service e from the guys at Cleator Moor.
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion