Either pick up yourself or buy an extra panel as i found out
Boarding the walls in a bathroom, luckily i purchased an extra one in case one was damaged and it was. The side was damaged badly and moisture resistant front looked like somebody had attacked it with a spade in many places by scratching the surface down to the plaster.
6 years ago
karl
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great
Very good quality.
7 years ago
Carmen
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
All Good
Ordered on line and delivered to my door as specified.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Glasroc F multiboard consists of gypsum incorporating a tissue of glass fibre immediately below the surface of the board. The core is reinforced with glass fibre rovings. Suitable for constructing all forms of partition and ceilings, including curved applications, giving high levels of fire and impact protection. Also offers increased levels of moisture performance. Can be used in semi-exposed situations such as eaves, canopies and carport under-linings.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.
Gyproc Thermaline Plus is a wallboard bonded to a expanded polystyrene insulant, with integral vapour control provided by the products closed cell structure in the foam. A cost-effective thermal laminate for new and existing buildings requiring a mid to high thermal performance levels.