Tyvek Double-sided Tape may be sandwiched between the membrane layers to seal horizontal or vertical laps as well as be used on the back of the membrane to temporarily adhere it to the substrate whilst installing.
Tyvek Double-sided Tape adheres to surfaces like OSB, Timber (rough, sawn, planed, grinded), Metal (aluminium, steel, cupper) and other.
Excellent adhesion properties under extreme humidity conditions
Strong initial tack
Suitable for all Tyvek and AirGuard membranes
Environmental Product Declaration available for download here: https://www.dupont.co.uk/content/dam/dupont/amer/us/en/performance-building-solutions/public/documents/en/EPD-DuPont-Tyvek-Tape-1310D.pdf
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
IKO Shed Felt is an economical, bituminous, fibre based roofing felt with a protective and decorative fine mineral finish. It is used to waterproof and protect a variety of common garden buildings, such as sheds, summerhouses, kennels and hutches
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Tyvek® Supro is the market-leading breather membrane, helping to protect roofs against wind and water, and also improve energy efficiency. Tyvek® Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs. Tyvek® Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications. Tyvek® Supro Plus offers the same benefits, plus an integral adhesive lap tape designed for use in the Tyvek® sealed roof system. Sealing all horizontal laps contributes to the system’s thermal efficiency by reducing air infiltration.
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
IKO Shed Felt is an economical, bituminous, fibre based roofing felt with a protective and decorative fine mineral finish. It is used to waterproof and protect a variety of common garden buildings, such as sheds, summerhouses, kennels and hutches
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Tyvek® Supro is the market-leading breather membrane, helping to protect roofs against wind and water, and also improve energy efficiency. Tyvek® Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs. Tyvek® Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications. Tyvek® Supro Plus offers the same benefits, plus an integral adhesive lap tape designed for use in the Tyvek® sealed roof system. Sealing all horizontal laps contributes to the system’s thermal efficiency by reducing air infiltration.