I have tried so many tapes, I originally used this for sticking a breather membrane and it was so sticky it just went everywhere, but I have ended up using it to stick dpm visquene together and to concrete as all other tapes and sealants were absolutely useless. It will make a mess if you ever want to get it off but thats the whole point.... It will stick anything and is by far the best i have ever used.
2 years ago
Lil from West yorkshire
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great double sided membrane tape
Perfect tape for breather membrane. Very sticky, has down the job.
6 years ago
Jon
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
3
Very sticky stuff
Very sticky stuff, where the sticky part comes off the plastic backing. I am sure it works well but don't assume you can pull it off and re-apply it in the correct place. Once on, the sticky part stays on.
Tyvek® Housewrap Breather membranes are a highly water resistant, vapour permeable membrane sheets suitable for use as a secondary protective layer in timber and steel frames as well as concrete wall systems. They offer excellent protection against external weather conditions whilst remaining dry with its unique breathable properties.
Maxi Provides High Performance With A Heavier Weight For Strength, Durability And No Gusting Wind Noise In All Applications. A 3 Layer Spun Bond Based Membrane With Excellent Tensile Strength And Nail Tear Resistance Suitable For Warm And Cold Roof Application.
Ultra 142gsm Provides Further High Performance With A Heavier Weight For Strength, Durability And No Gusting Wind Noise In All Applications. A 3 Layer Spun Bond Based Membrane With Excellent Tensile Strength And Nail Tear Resistance Suitable For Warm And Cold Roof Application.
An AirGuard® vapour control layer can significantly reduce heat loss and increase energy efficiency. By controlling heat transfer and reflecting heat inside the building, they help keep buildings cool in summer, and warm in winter. AirGuard® AVCLs offer highly engineered vapour control, to help your project meet sustainable building requirements and achieve environmental goals. Using AirGuard® AVCLs for internal walls and insulating external walls with Tyvek® breather membranes creates a building envelope that is airtight and vapour-open. Together, they provide a holistic solution for optimum energy efficiency and interior comfort.
Tyvek® Housewrap Breather membranes are a highly water resistant, vapour permeable membrane sheets suitable for use as a secondary protective layer in timber and steel frames as well as concrete wall systems. They offer excellent protection against external weather conditions whilst remaining dry with its unique breathable properties.
Maxi Provides High Performance With A Heavier Weight For Strength, Durability And No Gusting Wind Noise In All Applications. A 3 Layer Spun Bond Based Membrane With Excellent Tensile Strength And Nail Tear Resistance Suitable For Warm And Cold Roof Application.
Ultra 142gsm Provides Further High Performance With A Heavier Weight For Strength, Durability And No Gusting Wind Noise In All Applications. A 3 Layer Spun Bond Based Membrane With Excellent Tensile Strength And Nail Tear Resistance Suitable For Warm And Cold Roof Application.
An AirGuard® vapour control layer can significantly reduce heat loss and increase energy efficiency. By controlling heat transfer and reflecting heat inside the building, they help keep buildings cool in summer, and warm in winter. AirGuard® AVCLs offer highly engineered vapour control, to help your project meet sustainable building requirements and achieve environmental goals. Using AirGuard® AVCLs for internal walls and insulating external walls with Tyvek® breather membranes creates a building envelope that is airtight and vapour-open. Together, they provide a holistic solution for optimum energy efficiency and interior comfort.