The Cementone fast drying water-seal is a durable, water-repellent solution for porous external walls and fascias. The waterseal from Cementone deposits a rainproof resin in the capabilities of the substrate which expands on reaction with residual moisture and almost completely reduces the rain penetration, whilst allowing the substrate to breathe. Comes with a 1-year guarantee.
EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.
Brand Name
Nexus
Size
20 kg
Coverage
Coverage per 20kg, with joint size 5x20mm, slab size: 600x600mm should be approximately 37.31m2. Visit www.nexuspavingsystems.co.uk/calculator to calculate your requirements
Colour
Mid Grey
Drying Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Time to Set
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Walk On Hardness Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
The Cementone fast drying water-seal is a durable, water-repellent solution for porous external walls and fascias. The waterseal from Cementone deposits a rainproof resin in the capabilities of the substrate which expands on reaction with residual moisture and almost completely reduces the rain penetration, whilst allowing the substrate to breathe. Comes with a 1-year guarantee.
EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.