Allows vapour to pass through the surface of the grout
Ready to mix
The cementitious product of ProJoint Porcelain Grout will provide a far superior, long lasting finish than that of brush-in resin products such as ProJoint Fusion
Two x 10kg bags contained within the lidded mixing tub
Technical specification
Brand Name
Nexus
Size
20 kg
Coverage
Coverage per 20kg, with joint size 5x20mm, slab size: 600x600mm should be approximately 37.31m2. Visit www.nexuspavingsystems.co.uk/calculator to calculate your requirements
Colour
Neutral (buff)
Drying Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Time to Set
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Walk On Hardness Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Cementone Pave Seal is a clear, low viscosity, solvent based acrylic solution that penetrates deeply into dry concrete, brick, porous tiles etc, it provides excellent resistance to dirt and water.
The Cementone fast drying water-seal is a durable, water-repellent solution for porous external walls and fascias. The waterseal from Cementone deposits a rainproof resin in the capabilities of the substrate which expands on reaction with residual moisture and almost completely reduces the rain penetration, whilst allowing the substrate to breathe. Comes with a 1-year guarantee.
EASYJoint is a very quick, effective, and aesthetically pleasing way to fill joints between paving, be it natural stone or concrete flags. It is suitable for all types of paving material provided there is a gap of at least 3mm wide and 20mm deep.
EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.
Cementone Pave Seal is a clear, low viscosity, solvent based acrylic solution that penetrates deeply into dry concrete, brick, porous tiles etc, it provides excellent resistance to dirt and water.
The Cementone fast drying water-seal is a durable, water-repellent solution for porous external walls and fascias. The waterseal from Cementone deposits a rainproof resin in the capabilities of the substrate which expands on reaction with residual moisture and almost completely reduces the rain penetration, whilst allowing the substrate to breathe. Comes with a 1-year guarantee.
EASYJoint is a very quick, effective, and aesthetically pleasing way to fill joints between paving, be it natural stone or concrete flags. It is suitable for all types of paving material provided there is a gap of at least 3mm wide and 20mm deep.
EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.