70mm x 2400mm x 1200mm Ecotherm Eco-versal Pitched Roof Insulation PR70
Hover Over to Zoom In
Overview
- BBA certified
- Non irritant, rigid boards are easy to cut and fit between rafters / studs
- Will not rot, sag or decay – no need to replace
- Lightweight boards will not weigh structure down
- Out performs traditional insulants by 50% - you need approximately half the thickness
- Universal board can be used in a number of applications – reduced waste
Technical specification
Brand Name
Ecotherm
Length
2400 mm
Thickness
70 mm
Width
1200 mm
Type
Roof Insulation
Reviews
Be the first to review this product.
Knauf Insulation FrameTherm Roll 32 4500mm x 1140mm x 90mm
An A1 Non-Combustible Glass Mineral Wool roll, manufactured using Knauf Insulation's unique ECOSE® Technology, and designed specifically for use in timber frame applications between studwork.
£148.72 per pack (Inc. VAT)
Superfoil SF40 Insulation 1.5m x 10m 15m2 Per Pack
SuperFOIL SF40 delivers unmatched thermal performance in a multi foil insulation, offering the most
efficient and cost effective insulation solutions available.
3 in 1 product – High Performance Insulation, Vapour Control Layer and Radiant Barrier in one.
Suitable for New Build, Retrofit or Extensions in roof, wall and floor applications.
£300.37 each (Inc. VAT)
Actis Hybris Panels 155mm 2 Pack 2.74m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£63.11 per pack (Inc. VAT)
Actis Hybris Panels 105mm 4 Pack 5.49m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£83.16 per pack (Inc. VAT)