Hover Over to Zoom In
Overview
- A cold brush applied, solvent borne bituminous adhesive
- Use for bonding all types of roofing felt
- Can be applied direct to timber, asphalt, metal or concrete
- All surfaces must be clean, dry and free from grease, oil abd loose material
- Coverage - 1.0 - 1.5m2/Ltr depending on substrate
- Various size tins available
Technical specification
Size
5 L
Material
Bitumen Solution
Colour
Black
Usage
Felt Roofing
Coverage
1.5 m2/ltr
Coverage per Litre
1.0 - 1.5m2
Drying Time
Tacky in approx 15 minutes
VOC Level
330g/Ltr
Type
Adhesive
Manufacturer Model No
MW686235
Country Origin
Belgium
Brand Name
IKO
Range Description
IKOPro
Reviews
4.3
13 Reviews
Most liked positive review
I would buy this again
With roofing felt
Most liked negative review
Felt kept lifting on curved areas of roof.
Easy to use but felt kept lifting on curved parts of roof. Time damaged in transit.
Sort reviews:
Sort reviews by:
Reviewed by 13 customers
5
does the job, and cheaper that the [opular stores for same p
works a teat but be craeful- is seeks out cracks, poor joints n holes in the substrate so occasional drip through- And have it close to the area to be coated to avoid other drips- - it was vey warm day
1 year ago
David
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
4
Certainly looks the part
It's big and it's black and goes on well. Whether it keeps water ingress out over time is a future review.
5 years ago
Peter
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Does the job
I used this adhesive when replacing the felt on a large pent shed. Followed the instructions, no problems encountered and it did the job it is meant to do.
5 years ago
Philip
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Easy quality workable felt adhesive
When we took our new house on recently the shed was leaking really badly with extra layers placed (bad repairs )
Old shed roof old felt (two layers absolutely shot) ripped all felt off, brushed down the rollers this onto the surface.
First layer of felt fitted and edge laps sealed using same adhesive.
Then rollered the roof again placing second layer of felt on top across the length of the
First layer
Again used the adhesive / sealant to bind the over lapped edges
Finally coated the vertical sides that lap downwards.
Fitted kiln dried treated wood to finish.
We had many heavy rainstorms since . Hasn't leaked in 8 months!
5 years ago
CHRISTOPHER
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
3
I would purchase again
Good value
5 years ago
majid
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Brilliant packaging
I got several tins of this delivered , and each tin was tie wrapped in a stout plastic bag with my name and address printed in bold letters on each one , so there was no chance of leakage or misdelivery . Very impressed
5 years ago
David
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
5
This is the best I have ever used and lasts years
Used this product over 10 years on a new build shed. I used a 5 year life span felt.
This adhesive is superb
I have just replaced the felt with some new felt and the adhesive has protected all the timbers underneath.
6 years ago
Ian
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
4
Spot on
Like it says on tin
6 years ago
NICKY
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
5
Great product
Great product, delivered the next day, thank you.
6 years ago
Derek
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Yes would use again
Used this when replacing the felt on my shed roof easy to apply and made a nice tidy job
6 years ago
margaret
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
Tyvek® Double-Sided Tape 50mm x 25m
Tyvek® Double-sided Tape is recommended for use with Tyvek® UV Facade, but is also suitable for all other Tyvek® membranes and DuPont AirGuard® AVCL products. This advanced double-sided sealer Tape has a strong initial tack, and provides excellent adhesion properties even under extreme humidity conditions and varying temperatures.
£23.84 per roll (Inc. VAT)
Acrypol + Waterproof Roof Coating 5kg Black
Acrypol + is a total roof coating waterproof system developed to refurbish failed industrial, commercial or domestic flat roofs. Brush applied as a semi liquid paste, it dries to form an ultra tough, seamless flexible overlay
£75.80 each (Inc. VAT)
Tyvek® Supro Plus, with integral tape, Breather Membrane 1.5m x 50m
Tyvek® Supro is the market-leading breather membrane, helping to protect roofs against wind and water, and also improve energy efficiency. Tyvek® Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs. Tyvek® Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications. Tyvek® Supro Plus offers the same benefits, plus an integral adhesive lap tape designed for use in the Tyvek® sealed roof system. Sealing all horizontal laps contributes to the system’s thermal efficiency by reducing air infiltration.
£206.06 per roll (Inc. VAT)
CLEARANCE
IKOpro Emergency Roof Repair stops sudden leaks in roof felt and gutters. It has been specially formulated to stop leaks in emergency situations, even under the most severe weather conditions. It helps prevent unforeseen leaks from causing extensive damage to your home, enabling more time for a permanent repair to be planned.
£30.25 each (Inc. VAT)