This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.
The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.
Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.
This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.
The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.
Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.