An advanced 3 in 1 adhesive, sealant and filler with incredible adhesion on virtually any material. It's designed for trade professionals to replace multiple products with just one tube that delivers amazing all round performance.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
The Daltex Flame Retardant (LPS1207) Breathable Floor Protection is a non-woven material that can be used to protect numerous floor surfaces - vinyl, screed, wood, stone, terrazzo, and tiles - including those that are newly laid. It offers floor protection from liquid spillages, dirt, and dust whilst allowing it to breathe. Breather-Poly is very easy to apply, simply roll out and join together using a self-adhesive tape.
An advanced 3 in 1 adhesive, sealant and filler with incredible adhesion on virtually any material. It's designed for trade professionals to replace multiple products with just one tube that delivers amazing all round performance.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
The Daltex Flame Retardant (LPS1207) Breathable Floor Protection is a non-woven material that can be used to protect numerous floor surfaces - vinyl, screed, wood, stone, terrazzo, and tiles - including those that are newly laid. It offers floor protection from liquid spillages, dirt, and dust whilst allowing it to breathe. Breather-Poly is very easy to apply, simply roll out and join together using a self-adhesive tape.