When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The Yellow system has been developed to make the installation of Grant boilers both quick and simple, whilst ensuring trouble free operation – even in the most exposed site conditions.
The round low level kits feature self-sealing ducts requiring no silicone or tape for joints, and the unique quick-fit clamp arrangement ensures a perfect seal every time. In fact, the new telescopic flue system requires only two simple operations to complete the installation. The kits are compatible with all Grant boilers, (except Outdoor Modules) including condensing models.
The flue terminal has a compact design, making it ideal for installations where the visual appearance is important. The new cone design reduces the possibility of condensate, produced in the combustion process, staining external wall surfaces or patio slabs
When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof.
This standard horizontal flue kit for Glow-worm boilers measures 755mm from the centre of the 90 degree bend to the start of the terminal and allows the safe disposal of gases created during the combustion process. Efficient disposal of flue gases are necessary to maintain your central heating system, as the disposed acidic gases could cause corrosion and break down of the system. Quick and easy to install, all fixings are included, for a straightforward installation process. As well as the flue pipe itself, the kit contains sealing tape, flue securing screws and a clamping band.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The Yellow system has been developed to make the installation of Grant boilers both quick and simple, whilst ensuring trouble free operation – even in the most exposed site conditions.
The round low level kits feature self-sealing ducts requiring no silicone or tape for joints, and the unique quick-fit clamp arrangement ensures a perfect seal every time. In fact, the new telescopic flue system requires only two simple operations to complete the installation. The kits are compatible with all Grant boilers, (except Outdoor Modules) including condensing models.
The flue terminal has a compact design, making it ideal for installations where the visual appearance is important. The new cone design reduces the possibility of condensate, produced in the combustion process, staining external wall surfaces or patio slabs