Designed for use with the Vaillant ecoTEC boiler range, the Vaillant Vertical Boiler Flue Kit provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
Where a suitable gravity drain is not available the soakaway can be used in conjunction with 10mm lime chippings. Compatible with the following pipe sizes: 22mm (3/4") overflow, 32mm (1-1/4") and 40mm (1-1/2").
Designed for use with the Worcester Greenstar Boiler Range, the Worcester Condensfit II Vertical Flue provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside, or through a flat or pitched roof. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
Designed for use with the Vaillant ecoTEC boiler range, the Vaillant Vertical Boiler Flue Kit provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
Where a suitable gravity drain is not available the soakaway can be used in conjunction with 10mm lime chippings. Compatible with the following pipe sizes: 22mm (3/4") overflow, 32mm (1-1/4") and 40mm (1-1/2").
Designed for use with the Worcester Greenstar Boiler Range, the Worcester Condensfit II Vertical Flue provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside, or through a flat or pitched roof. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler.
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.