Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.