Recommended applications include: Stanchion base plates, joints between precast concrete panels, grouting applications where pouring access is restricted, anchoring of reinforcing steel bars, installation of tie bars, trowelling consistency can be used for bedding and in lieu of dry packs
The low water requirement ensures high early strength and long term durability
The filler grading produces a highly flowable grout which will not segregate or bleed
Clean tools and equipment with clean water immediately after use
I'd buy the product again but I wouldn't order from tp again
Purchased one too many and brought 1 bag back to my local tp who told me they wouldn't refund and to send it back through the post to their headoffice. The product itself was great
6 years ago
saffet
2
6
5
Good product
Good product only problem guys in the store had no idea, had to order through the web site
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Sika Damp-proofing Slurry is a ready to use (just add water), high quality, thin layer waterproof slurry coating, based on special cements and admixtures to provide a water and damp proof finish.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.