High quality isolating valve is WRAS approved and leak tested. The valve can be opened and closed using a screwdriver to cut off the water supply so that essential repairs can be carried out.
The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
High quality isolating valve is WRAS approved and leak tested. The valve can be opened and closed using a screwdriver to cut off the water supply so that essential repairs can be carried out.
The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.