Hep2O Flexible Tap Connector 300mm X 15mm X 15mm HD125H/15W Qty 2
Hover Over to Zoom In
Overview
- BS EN 7291 parts 1 and 2, WRAS approved
- For intermittent hot and cold water use up to a maximum of 65°C
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition for secure joints
- Feel the rumble, leak free connection guaranteed
- Secure demounting with HepKey system
- 50 year industry leading guarantee
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mm
- BS EN 7291 parts 1 and 2, WRAS approved
Technical specification
Diameter
15 mm
Length
300 mm
Thread Size
15 mm
Connection Type
Push-fit x BSP
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Pack Quantity
2
Made To Order
N
Manufacturer Model No
HD125H/15W
Country Origin
United Kingdom
Brand Name
Hep2O
Range Description
Flexible Connectors
Reviews
Be the first to review this product.
JG Speedfit flexible hose 22mm x 3/4inch 500mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£12.13 each (Inc. VAT)
Hep2O straight tap connector with brass nut white 0.75x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£5.44 each (Inc. VAT)
JG Speedfit monobloc flexible connector hose 15mm x M10 male
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a female mixer tap. This hose is ideal for the connection to monobloc mix taps. To make a connection simply push the fitting fully on to the pipe and screw the thread into the bloc. The hose has off set spanner locations to ease installation. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£11.78 each (Inc. VAT)