Osma PVC-C solvent weld waste is suitable for both interior and exterior use and is designed to withstand higher in-service temperatures. It has UV and heat resistance as well as fire retardant properties.
Osma PVC-C solvent weld waste is suitable for both interior and exterior use and is designed to withstand higher in-service temperatures. It has UV and heat resistance as well as fire retardant properties.
OsmaWeld solvent weld waste is manufactured in ABS offering secure jointing, a wide range of fittings (32/40 & 50mm) and black, grey and white colour options.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Osma PVC-C solvent weld waste is suitable for both interior and exterior use and is designed to withstand higher in-service temperatures. It has UV and heat resistance as well as fire retardant properties.
Osma PVC-C solvent weld waste is suitable for both interior and exterior use and is designed to withstand higher in-service temperatures. It has UV and heat resistance as well as fire retardant properties.
OsmaWeld solvent weld waste is manufactured in ABS offering secure jointing, a wide range of fittings (32/40 & 50mm) and black, grey and white colour options.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.