Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
This Steel Angle 90 from Tradeline is designed for the suspension of sub-grids and ceiling systems. Used for general applications in ceilings, dry lining and cloaking deflection heads in partitioning systems. Easy to cut and form.
This reinforced corner tape is a paper jointed tape bonded by two high quality corrosion resistant steel strips which provide great reinforcing properties for any internal & external angles in plasterboard construction. The premium quality, low friction paper helps achieve a perfect edge and aids the reduction of friction burn during application.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
This Steel Angle 90 from Tradeline is designed for the suspension of sub-grids and ceiling systems. Used for general applications in ceilings, dry lining and cloaking deflection heads in partitioning systems. Easy to cut and form.
This reinforced corner tape is a paper jointed tape bonded by two high quality corrosion resistant steel strips which provide great reinforcing properties for any internal & external angles in plasterboard construction. The premium quality, low friction paper helps achieve a perfect edge and aids the reduction of friction burn during application.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.