Simpson JHA270/63 Timber to Timber Joist Hanger
5
1 Review
Hover Over to Zoom In
Overview
- The industry standard timber hanger for solid joists
- Speed prongs provide a temporary fix for an even quicker installation
- A location tab in the bottom of the hanger allows quick and accurate alignment
- Wider than normal strap ensures maximum contact where it counts
- Face fix or wrap over installation
Technical specification
Height
248.5 mm
Thickness
0.90 mm
Width
63 mm
Material
Pre-Galvanised Steel
Finish
Galvanised
Pack Quantity
1
Type
Joist Hanger
Range Description
Builder Metalwork
Brand Name
Simpson Strong-Tie
Manufacturer Model No
JHA
Reviews
5
1 Review
Sort reviews:
Sort reviews by:
Reviewed by 1 customers
5
I would not order on the web again
Had to change at branch for smaller size.As ordered on web it was difficult to change in branch unless I paid a re-stocking charge.This charge meant I had to pay more for the replacements.
6 years ago
Carol
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.68 each (Inc. VAT)
Simpson Strong Tie 120 x 55 x 30mm Adjustable Reinforced Angle Bracket (Box of 50)
The Simpson EFIXR range of brackets are adjustable angle brackets with 2 obround fixing holes. The EFIXR angle brackets are intended for all assemblies and installations of interior and exterior joinery. The reinforcing notch improves stiffness & rigidity.
£131.40 per box (Inc. VAT)
Simpson Strong Tie 5mm Twist Restraint Strap 30 x 1000mm
Light and heavy restraint straps for vertical and horizontal restraints when connecting timber floors and roof systems to masonry walls
£6.67 each (Inc. VAT)
Simpson Strong-Tie Girder Truss Clip 47 mm wide TCP47
The TCP47 truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.
£0.60 each (Inc. VAT)