Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate
A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.
Integral swing check valve which will prevent backflow of water from the discharge hose
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted