Speedfit push-fit valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the valve fully onto the pipe and turn the knob on top of the fitting to allow or with strict the flow of water. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
15mm demountable stop-end for Hep2O push-fit plumbing system.
Hep2O is not just designed to perform, it’s built to last which is why it comes with a 50 year guarantee (twice as long as anyone else). The slim and sleek push-fit plumbing fittings work with both plastic and copper pipe and are ideal for a range of hot and cold water, and heating applications. Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the valve fully onto the pipe and turn the knob on top of the fitting to allow or with strict the flow of water. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
15mm demountable stop-end for Hep2O push-fit plumbing system.
Hep2O is not just designed to perform, it’s built to last which is why it comes with a 50 year guarantee (twice as long as anyone else). The slim and sleek push-fit plumbing fittings work with both plastic and copper pipe and are ideal for a range of hot and cold water, and heating applications. Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. The Stem Elbow allows a 90 degree male to female connection making it the perfect coupler for appliances such as cold water storage tanks. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: will all plastic pipes the relevant manufacturer’s pipes insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.