An ideal choice for a wide range of roofing applications, the Liniar Fascia joints are suitable for capping and replacement boards. The long joints can be cut into halves to be used in pairs with shorter width boards.
Telecopic Underfloor Vents Facilitate A Flow Of Air From Beneath Suspended Timber Block And Beam Floors Through The Cavity. The Units Are Adjustable Vertically To Extend Through A Number Of Brick Courses.the Front Of The Vent Is Designed To Fit An Easy-trim Brick Vent Or, Where Horizontal Extension Is Required, And Easy-trim Cavity Sleeve Can Be Used. The Rear Of The Vent Features A Grill Panel Designed To Prevent The Entry Of Insects, Rodents Or Debris So As To Avoid Airflow Blockages.
The general purpose trim from Liniar is used for a number of soffit applications. It is a joint trim for the hollow soffit and 9mm soffit board to join them together. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
An ideal choice for a wide range of roofing applications, the Liniar Fascia joints are suitable for capping and replacement boards. The long joints can be cut into halves to be used in pairs with shorter width boards.
Telecopic Underfloor Vents Facilitate A Flow Of Air From Beneath Suspended Timber Block And Beam Floors Through The Cavity. The Units Are Adjustable Vertically To Extend Through A Number Of Brick Courses.the Front Of The Vent Is Designed To Fit An Easy-trim Brick Vent Or, Where Horizontal Extension Is Required, And Easy-trim Cavity Sleeve Can Be Used. The Rear Of The Vent Features A Grill Panel Designed To Prevent The Entry Of Insects, Rodents Or Debris So As To Avoid Airflow Blockages.
The general purpose trim from Liniar is used for a number of soffit applications. It is a joint trim for the hollow soffit and 9mm soffit board to join them together. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.