Spiral point for immediate start. No pilot hole required
Permeated case with through hardening allows the perfect balance between core ductility and surface toughness with the strength of a high tensile bolt the screw will not snap
Part thread eliminates jacking where a full threaded screw tends to pull apart the jointed material
Collar gives strength to the most vulnerable point of the screw, whilst allowing a deeper recess and less cam-out for a secure drive
Three flats on the thread means that as the screw is driven there is less surface contact between the screw and timber allowing less battery wear, easier insertion and the screw will not work loose as the boards are walked upon
Net-Coat® Green developed for new pressure treated timber and outdoor use
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of a pilot hole.
Carpenters Mate pro hexagon head screws have been specifically developed for fixing multiple pieces of timber together. These structurally approved timber screws have an 8mm hex drive head for easy insertion, and a countersunk under the washer-hex head to assist in providing a flush finish. The Carpenters Mate pro hex head screws feature a slash point to reduce timber splittage and remove the need for pre-drilling.
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression.
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of a pilot hole.
Carpenters Mate pro hexagon head screws have been specifically developed for fixing multiple pieces of timber together. These structurally approved timber screws have an 8mm hex drive head for easy insertion, and a countersunk under the washer-hex head to assist in providing a flush finish. The Carpenters Mate pro hex head screws feature a slash point to reduce timber splittage and remove the need for pre-drilling.