Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Visqueen Damp ProCourse 100mm x 20m
5
1 Review
Hover Over to Zoom In
Frequently bought together
Overview
- Excellent performance under high compressive loads
- Contains no hazardous pitch or PVC plasticisers making it safe and clean to handle
- Low permeability to Radon and Carbon Dioxide gases
- Superior strength, tear resistance and flexibility
- Excellent mortar adhesion
- BBA Certificate No.94/3059
Technical specification
Brand Name
Visqueen
Length
20 m
Thickness
0.80 mm
Width
100 mm
Material
Copolymer Thermoplastic
Colour
Black
Coverage
2 m2
Pack Quantity
1
Type
Damp Proof Course
Safeguard Drybase Overseal Tapes 150MM X 20M
Waterproof butyl overseal tape primarily used to link the perpendicular joint between wall membrane and floor membrane installations. Also used to seal joints on floor membrane applications and for detailing penetrating services.
£70.38 each (Inc. VAT)
IKO Hyload Original Damp Proof Course 150mm x 20m
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
£60.98 per roll (Inc. VAT)
Safeguard Drybase Fleece Overseal Tape 100MM X 20M
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
£40.24 each (Inc. VAT)
Safeguard Dryrod Damp Proofing Rods Pack of 10
Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£20.87 per pack (Inc. VAT)