Hover Over to Zoom In
Overview
- Fast and simple installation
- Heat free, no soldering needed
- Joint can be dismantled and re-built
- Joints can be made on wet pipework
- Standard 5 Year Manufacturing Guarantee
- Manufactured to EN1254 Specification
- WRAS approved where required
- Pressure tested to 16 bar
- UK manufacture
Technical specification
Diameter
22 mm
Suitable for
Water
Connection Type
Compression
Material
Brass
Years Guaranteed
5
Type
Compression Sundries
Brand Name
Travis Perkins
Manufacturer Model No
P9212
Made To Order
N
Reviews
Be the first to review this product.
Hep2O straight tap connector with brass nut white 0.75x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£5.44 each (Inc. VAT)
JG Speedfit straight connector 22mm
Speedfit push-fit plastic fitting for the connection of plastic and cooper pipe. Simply push the fitting onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fitting methods. Note; with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£3.65 each (Inc. VAT)
JG Speedfit female tap connector 22mm x 3/4inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£4.54 each (Inc. VAT)
JG Speedfit Plastic Straight Service Valve Tap Connector White 15SVSTC-W
The valve allows the user to stop the flow of water to a tap in case of emergency or repair via a 1/4 turn of a screw on the valve.
£16.66 each (Inc. VAT)