Hover Over to Zoom In
Overview
- Up to 20 bar 30° - 10 bar 114°
- Performance Fully demountable DZR Brass fitting
- Compatible with Copper, Tectite Tube, PB, PEX and Carbon Steel
- Electrical continuity
- Rodent resistant
- Heat free installation
Technical specification
Suitable for
Water
Diameter
22 mm
Connection Type
Push Fit
Material
DZR
Colour
Natural
Type
Elbows
Made To Order
N
Manufacturer Model No
45500
Country Origin
Germany
Brand Name
Pegler
Range Description
Classic
Reviews
Be the first to review this product.
JG Speedfit 90° Equal Elbow Elbow 22mm
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£4.43 each (Inc. VAT)
CLEARANCE
Greenstar Oilfit range the easy fit fluing solution. Multiple fluing options with the ability to flue internal floor standing boilers from the top, rear or side and external boilers from the rear and side. The Oilfit range is quick to install thanks to its push fit connection and forms a gas tight seal. In most cases, it will also eliminate the need to cut the flue. The Greenstar Oilfit range provide an easy fit installation that requires no special tools when fitting flue extensions, elbows and adaptors.
£58.80 each (Inc. VAT)
JG Speedfit elbow 10mm Pack 10
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£38.16 per bag (Inc. VAT)