Hover Over to Zoom In
Overview
- 8mm compression
Technical specification
Diameter
8 mm
Material
Brass
Colour
Brass
Type
Isolating Valve
Brand Name
Own Brand
Reviews
Be the first to review this product.
Red Handle Lever Ball Valve - 22mm
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
£8.90 each (Inc. VAT)
CLEARANCE
A 2-Port motorised valve supplied with 28mm compression fittings. It is to be used for the flow control of central heating or hot water in 'S plan' central heating systems. The valve operates in conjunction with either a room thermostat or a cylinder thermostat. It will open only when in demand from the thermostat with the actoin of a geared synchronous motor and closes by a spring return mechanism. When the valve is in the open position, a limit switch operates to switch on the heat source. Please note that this valve must be installed according to the direction of the flow as indicated by the arrow on the valve body. It is only suitable for open vented or sealed pumped systems.
The valve comes with a 5 core colour coded flexible cable at a length of 1 metre for ease of installation. Power consumption of the unit at 6W, with a temperature range of 5°C to 88°C and a maxiumum differential pressure of 1 Bar.
Both the actuator heat and synchronous motor are replaceable.
£60.22 each (Inc. VAT)