Sika-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
25 kg
Coverage per Litre
3 – 4 kg/m2, thickness 1.5 – 2 mm for pressureless water
Achieve rich, consistent color matching for brickwork, pointings, and renders with Everbuild 208 Powder Mortar Tone - Brown (PMTBN1). Formulated from high-grade synthetic iron oxide pigments, this powder dye provides permanent, lightfast coloring for all cementitious mixtures without reducing compressive strength. Free from lime, it easily dispenses into dry mortar mixes, making it the ideal trade choice for matching existing masonry, laying decorative brickwork, or tinting floor screeds.
The RLT CLEARMOULD SPRAY is a non-aerosol, water-based spray which is a quick and effective material for treating mould and mildew contaminations on carpets, leather goods, clothes, furniture and soft furnishings.
Spray affected surfaces, allow to dry and vacuum with a HEPA filter cleaner. For leather goods after cleaning apply a good quality polish.
RLT CLEARMOULD SPRAY can also be used to treat musty smells arising from heavy airborne contamination of mould spores in rooms, inside wardrobes and cupboards. Spray on the affected areas and leave for 30 minutes to allow product to work and dry.
The products are approved by the Health and Safety Executive under the Control of Pesticides Regulations (COPR) 1986 (as amended) for both amateur and professional use.
Size
235 ml
Suitable for
Soft Furnishings, Carpets, Curtains and Leather Goods
Coverage
0.5L per 4 to 5 Square meters
Interior or Exterior Use
Interior
Container Type
Plastic Bottle
Application Method
Spray
Type
Ready to use
Pack Quantity
Single
Certifications Met
Approved under COPR 1986(as amended) by the H&S Executive HSE No 4824
Sika-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Achieve rich, consistent color matching for brickwork, pointings, and renders with Everbuild 208 Powder Mortar Tone - Brown (PMTBN1). Formulated from high-grade synthetic iron oxide pigments, this powder dye provides permanent, lightfast coloring for all cementitious mixtures without reducing compressive strength. Free from lime, it easily dispenses into dry mortar mixes, making it the ideal trade choice for matching existing masonry, laying decorative brickwork, or tinting floor screeds.
The RLT CLEARMOULD SPRAY is a non-aerosol, water-based spray which is a quick and effective material for treating mould and mildew contaminations on carpets, leather goods, clothes, furniture and soft furnishings.
Spray affected surfaces, allow to dry and vacuum with a HEPA filter cleaner. For leather goods after cleaning apply a good quality polish.
RLT CLEARMOULD SPRAY can also be used to treat musty smells arising from heavy airborne contamination of mould spores in rooms, inside wardrobes and cupboards. Spray on the affected areas and leave for 30 minutes to allow product to work and dry.
The products are approved by the Health and Safety Executive under the Control of Pesticides Regulations (COPR) 1986 (as amended) for both amateur and professional use.