Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.
Made from the Jute plant, hessian fabric is a versatile and affordable material that serves a valuable purpose within the construction industry. Its long bast fibre is spun into coarse, strong threads, producing an open weave hessian cloth that can be utilised for a number of purposes.
Due to its excellent thermal properties, it is often used in the construction industry to protect brickwork, mortar and concrete during the cold period. In summer, hessian can be soaked to stop concrete or cement from drying too quickly.
Whatever you need it for, our stock of hessian cloth roll will suit your needs. Both breathable and biodegradable, this eco-friendly fabric, also known as Jute and burlap, is available in 1.37m x 46m rolls. Each roll of our hessian cloth is single wound.
If this is the item you need, please select your desired quantity and add to your quote or basket today.
Proguard Visqueen Firerated Door Sleeves (LPS1207) certified, fire retardant, semi-translucent plastic sleeves fit any standard size doors and provide cost effective protection from dust, dirt, paint and mortar splashes during building and refurbishment work. Each flame resistant sleeve is sealed on two sides to slip over the door quickly and easily, allowing it to remain fully operational once the sleeve is fitted. The cover also provides a surface for fixing any additional protection materials without causing damage to the doors or leaving any adhesive residue.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.
Made from the Jute plant, hessian fabric is a versatile and affordable material that serves a valuable purpose within the construction industry. Its long bast fibre is spun into coarse, strong threads, producing an open weave hessian cloth that can be utilised for a number of purposes.
Due to its excellent thermal properties, it is often used in the construction industry to protect brickwork, mortar and concrete during the cold period. In summer, hessian can be soaked to stop concrete or cement from drying too quickly.
Whatever you need it for, our stock of hessian cloth roll will suit your needs. Both breathable and biodegradable, this eco-friendly fabric, also known as Jute and burlap, is available in 1.37m x 46m rolls. Each roll of our hessian cloth is single wound.
If this is the item you need, please select your desired quantity and add to your quote or basket today.
Proguard Visqueen Firerated Door Sleeves (LPS1207) certified, fire retardant, semi-translucent plastic sleeves fit any standard size doors and provide cost effective protection from dust, dirt, paint and mortar splashes during building and refurbishment work. Each flame resistant sleeve is sealed on two sides to slip over the door quickly and easily, allowing it to remain fully operational once the sleeve is fitted. The cover also provides a surface for fixing any additional protection materials without causing damage to the doors or leaving any adhesive residue.