4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
This reinforced corner tape is a paper jointed tape bonded by two high quality corrosion resistant steel strips which provide great reinforcing properties for any internal & external angles in plasterboard construction. The premium quality, low friction paper helps achieve a perfect edge and aids the reduction of friction burn during application.
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.
4Trade Plasterboard joint tape is a self-adhesive fibreglass mesh, which is thin and light, but extremely strong and easy to use it greatly increases joint strength and durability for less cracking and requires no embedding coat which reduces drying time.
Proguard Window Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for the protection of windows, glazed panels and window frames which are often susceptible to scratches, plaster and paint splashes, especially during refurbishment.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Window Film Applicator or by hand.
The low tack adhesive backing adheres to most surfaces without any tape required and will stay securely in place once applied. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films. Unlike some alternative products, Proguard Window Film has anti-UV properties to ensure that direct sunlight does not cause the adhesive to transfer onto the windows.
This reinforced corner tape is a paper jointed tape bonded by two high quality corrosion resistant steel strips which provide great reinforcing properties for any internal & external angles in plasterboard construction. The premium quality, low friction paper helps achieve a perfect edge and aids the reduction of friction burn during application.
Proguard Hard Surface Protection Film is a 100% waterproof, high-quality self-adhesive film designed specifically for protecting hard surfaces such as vinyl, marble, tiled and cured timber floors. It is perfect for preventing damage from spillages and other debris as well as reducing clean up time at the end of a building, DIY project or party/event, etc.
The low tack adhesive film adheres to most hard surfaces without any tape required and will stay securely in place once applied, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue which can be a problem with poor quality films.
The lightweight rolls are forward wound (adhesive side is on the inside and therefore not exposed to dirt) which makes the rolls perfect for application with our Proguard Film Applicator or by hand. This product can also be used for protection of items after manufacture to ensure they arrive in perfect condition.