This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.
The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
�
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Temporary Screening Props are the most simple and effective way of constructing a temporary dust screen to protect areas from dust transfer. When used with polythene sheeting the props allow users to seal off areas in offices, homes or industrial sites during building work.
The aluminium pole adjusts easily up to 4m with a twist action to lock. Additional stability is ensured with a non-skid, non-marking pad at the top of the pole which grips the ceiling, while the non-skid base keeps the foot of the pole and the sheeting locked in position on the floor.� The head of the prop has a clip to hold the polythene in place.
The props should be placed every 2.5m to 3m (or closer if there is a lot of air movement). They are ideally suited for use with the Eazi-Zip Door, Eazi-Clips and polythene sheeting to create a complete and versatile temporary dust screen.
This specially created foam protection is highly versatile providing excellent impact protection. They are extremely hard wearing and can be reused. The self-gripping u-profile tube is shaped to clip directly onto the handrail or balustrade without the need for additional fixing.
The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
�
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
Temporary Screening Props are the most simple and effective way of constructing a temporary dust screen to protect areas from dust transfer. When used with polythene sheeting the props allow users to seal off areas in offices, homes or industrial sites during building work.
The aluminium pole adjusts easily up to 4m with a twist action to lock. Additional stability is ensured with a non-skid, non-marking pad at the top of the pole which grips the ceiling, while the non-skid base keeps the foot of the pole and the sheeting locked in position on the floor.� The head of the prop has a clip to hold the polythene in place.
The props should be placed every 2.5m to 3m (or closer if there is a lot of air movement). They are ideally suited for use with the Eazi-Zip Door, Eazi-Clips and polythene sheeting to create a complete and versatile temporary dust screen.