Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm
Hover Over to Zoom In
Frequently bought together
Overview
- Approved Document A of the Building Regulations requires lateral restraint to be provided at each floor at a maximum of 2 metre centres
- Restraint straps “perpendicular” to the floor joists are required to be held tight against the masonry and fixed across the first 3 joists
- Restraint straps “parallel” to the floor joists are required to be held tight to the masonry and be at least 1200mm long
- The characteristic tensile strength for horizontal restraint straps should not be less than 8 kN
- Formed edge design gives additional strength on bend
- Quicker to install - can fit over top of floor joists and truss bottom chords
- Easier to course with blockwork
- No need to notch joists
- Complies with BS EN 845-1
Technical specification
Length
1000 mm
Thickness
1.50 mm
Width
38 mm
Material
Pre-Galvanised Steel
Finish
Pre-Galvanised
Pack Quantity
1
Type
Bent Strap
Brand Name
Simpson Strong-Tie
Manufacturer Model No
HES10B10
Data sheets
Reviews
Be the first to review this product.
Simpson Strong Tie 120 x 55 x 30mm Adjustable Reinforced Angle Bracket (Box of 50)
The Simpson EFIXR range of brackets are adjustable angle brackets with 2 obround fixing holes. The EFIXR angle brackets are intended for all assemblies and installations of interior and exterior joinery. The reinforcing notch improves stiffness & rigidity.
£131.40 per box (Inc. VAT)
Fixing Band 20mm Plastic 10m Roll
FB20 fixing band is for all general light strapping needs.
Perfect for DIY, industrial, and agricultural applications. Comes in convenient 10-metre rolls.
FB20 comes supplied in a rugged plastic dispenser, making it much easier to transport and work with.
£11.65 each (Inc. VAT)
Simpson Strong Tie Light Duty Angle Bracket 40 x 40 x 15mm (Pack of 100)
Simpson Strong-Tie Angle Bracket 40 x 40 x 15mm (L x H x W) is a light duty steel angle bracket with electro galvanised finish. It is commonly used to reinforce furniture frames and other structural parts. This bracket comes with 4.2mm screw/nails holes‚ for easy installation.
£194.40 per pack (Inc. VAT)
Staifix Spb Frame Cramp 100mm
Suitable where a restraint is required between masonry and in-situ structures. They can be fixed to a range of materials including concrete, steelwork and masonry.
£0.67 each (Inc. VAT)