Evo-Stick Waterproof Wall Tile Adhesive is a ready-mixed, mould-resistant, waterproof tile adhesive suitable for fixing ceramic wall tiles to most types of sound, and interior surfaces.
As the adhesive is waterproof, it is ideal for use in areas subject to infrequent wetting and condensation, such as kitchen and bathroom walls. This showerproof wall tile adhesive can also be applied directly onto existing tiles for convenience.
Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders, and tile backer boards.
Suitable tiles: For fixing ceramic wall tiles.
Available as a 10L waterproof wall tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the impact of the product on the environment.
Suitable for
Suitable for fixing ceramic wall tiles onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.
Interior or Exterior Use
Interior
Application Method
Tiling trowel
Drying Time
24 hours in good conditions
Time to Full Cure
Minimum 24 hours, for non porous surfaces leave for up to 72 hours. Cold conditions will prolong drying times
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
The original Denso pipe repair tape for protection below ground or underwater against corrosion on pipework, metal surfaces and cables and temporary sealing of fractured mains and cable joints.
Evo-Stick Waterproof Wall Tile Adhesive is a ready-mixed, mould-resistant, waterproof tile adhesive suitable for fixing ceramic wall tiles to most types of sound, and interior surfaces.
As the adhesive is waterproof, it is ideal for use in areas subject to infrequent wetting and condensation, such as kitchen and bathroom walls. This showerproof wall tile adhesive can also be applied directly onto existing tiles for convenience.
Suitable materials: Suitable for fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders, and tile backer boards.
Suitable tiles: For fixing ceramic wall tiles.
Available as a 10L waterproof wall tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the impact of the product on the environment.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
The original Denso pipe repair tape for protection below ground or underwater against corrosion on pipework, metal surfaces and cables and temporary sealing of fractured mains and cable joints.