Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16†and 24†joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
The Gyproc Thermaline plasterboard provides a basic level of thermal insulation and is ideal for areas that need a low-level thermal insulation upgrade. Factory bonded to an expanded polystyrene insulant with zero ODP (ozone depletion potential), the wallboards suit refurbishments and new builds, and providing durable, high-quality lining for walls, ceilings, and more.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Gyproc plasterboard in small easy-to-handle sizes.
Smaller easy-to-use, carry and install board with a specially modified liner and controlled suction. It enables easier fixing to 16†and 24†joist centres for ceiling lining. The board is suitable for direct decoration or a Thistle plaster finish. Length is compatible with both 16inch and 24inch joist centres, for ceiling linings.
Knauf Wallboard is a plasterboard with an ivory paper face, ideally suited to receive a plaster finish, or for direct decoration. Strong, versatile, and good value, Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A.
The Gyproc Thermaline plasterboard provides a basic level of thermal insulation and is ideal for areas that need a low-level thermal insulation upgrade. Factory bonded to an expanded polystyrene insulant with zero ODP (ozone depletion potential), the wallboards suit refurbishments and new builds, and providing durable, high-quality lining for walls, ceilings, and more.